Featured image of 2019 Creality CR-10 V2 Review: 10-Hour Testing

2019 Creality CR-10 V2 Review: 10-Hour Testing

All3DP
Nov 26, 2019

The CR-10 V2 is Creality's newest addition to the tremendously popular CR-10 series, but is it an improvement? Read our review to see what we found after 10 hours of testing.

All3DP is an editorially independent publication. Editorial content, on principle, can not be bought or influenced. To keep All3DP free and independent, we finance ourselves through advertising and affiliate revenues. When you purchase using a shopping link on our site we earn an affiliate commission. Learn more
Advertisement

Since Chinese manufacturer Creality released the genre-defining Creality CR-10 in mid-2017, they’ve released a lot of variants, with follow-up models such as the improved Creality CR-10S. As of 2019, it is still one of the most copied designs in the 3D printing cosmos.

Now, two years after the introduction of the CR-10, Creality has released a direct successor in the CR-10 V2. So what does this new version bring to the table? Is it worth your money? To find out, dive into our 10-hour review.

Creality CR-10 V2
Creality CR-10 V2 Review: 10-Hour Testing

How we Benchmark

For the benchmarking element of our review, we use the following guidelines:

Unbox the printer: We unbox the printer and assemble it according to the manufacturer’s instructions. Deficiencies and errors are noted and build around according to the consensus online for the printer.

Filament: We use white eSun PLA+ filament. Temperature settings are 215 °C for the nozzle and 60 °C for the bed.

Printing: We print two test models — Benchy and the Kickstarter x Autodesk FDM 3D Printer Assessment — using the manufacturer-provided/recommended slicer and settings. If the printer ships without a dedicated slicer and profile, we generate a generic Cura profile using the essential information of the printer.

After the first print, we inspect the object for easily fixable problems (i.e., a loose belt or a poorly leveled print bed) and then print again. If the printer can’t provide a decent result after three attempts, we stop. Printers that fail to produce a test object receive zero points for the respective test object.

1. Benchy

The Benchy 3D printer torture test is one of the world’s most popular prints. It helps to measure the dimensional accuracy capabilities of your printer and helps highlight other visible print nastiness.

We measure our best Benchy print using digital calipers, scoring 15 criteria against their target value. A total of 15 points are available.

  1. Overall length: 60 mm
  2. Overall width: 31 mm
  3. Bridge Roof length: 23 mm
  4. Chimney roundness inner diameter: 3 mm
  5. Chimney roundness outer diameter: 7 mm
  6. Vertical overall-height: 48 mm
  7. Box depth: 9 mm
  8. Box inner length: 7 mm
  9. Box outer length: 10.81
  10. Box outer width: 12 mm
  11. Box inner width: 9 mm
  12. Hawsepipe inner diameter left: 4 mm
  13. Hawsepipe inner diameter right: 4 mm
  14. Bridge front window width: 10.5 mm
  15. Rear window inner diameter: 9 mm

To accommodate the difficulty and inaccuracies when measuring small features, we have implemented a sliding scale of tolerance in our scoring. The smaller the feature, the greater our allowance for deviation:

  • 60 mm to 23 mm: 1 percent tolerance allowed
  • 23 mm to 7 mm: 5 percent tolerance allowed
  • 7 mm to 0 mm: 10 percent tolerance allowed

Finally, we do a visual inspection and note any flaws and problems we encounter.

2. Kickstarter x Autodesk FDM 3D Printer Assessment

The Kickstarter x Autodesk print exposes an FDM printer’s precision via six distinct tests in one object.

By pushing a printer’s hardware and software the system to the point of failure, the print reliably visible imperfections that can be used to assess the performance of the slicer, the extruder, and the motion system together.

The Kickstarter Autodesk test 3D printer test (image: Kickstarter)

Here’s what’s getting measured.

  • Dimensional Accuracy
  • Fine Flow Control
  • Fine Negative Features
  • Overhangs
  • Bridging
  • XY Resonance
  • Z-axis alignment

The tolerances and measurements are very detailed. You can find the exact measuring procedure on Github. The highest possible score is 30, indicating a very well-calibrated system.

It’s worth noting that these benchmarking tests are not a definitive measure of a printer’s worth. More an indication of a printer’s state out of the box with no-tinkering, it’s only after a full evaluation and in-depth review that we fully judge a 3D printer.

Advertisement

Back to Contents

License: The text of "2019 Creality CR-10 V2 Review: 10-Hour Testing" by All3DP is licensed under a Creative Commons Attribution 4.0 International License.

Subscribe to updates from All3DP

You are subscribed to updates from All3DP

You can’t subscribe to updates from All3DP. Learn more… Subscribe

You can’t subscribe to updates from All3DP. Learn more…

Advertisement
Recommended for you
Topics
Follow us

Advertisement